What should I do if the Drg-Scotch Yoke Series Actuator fails

The Drg-Scotch Yoke Series Actuator is usually used to manually operate the valve. When the fork actuator fails, the following steps can be taken to eliminate :

1. check the mechanical connection : check the mechanical connection part of the fork actuator, including the fork, transmission rod, valve rod, etc., to ensure that they are not damaged or loose.

2.lubrication and cleaning : the mechanical connection part of the fork actuator is lubricated, and the parts that may be contaminated are cleaned to ensure the smooth operation of the mechanical connection.

Check the valve : check whether the valve itself is normal, sometimes the valve failure will lead to the fork actuator can not operate normally.

Adjusting the position : If the position of the fork actuator is not correct, it may lead to poor operation or failure to fully close or open the valve, so it is necessary to adjust the position of the fork actuator.

5.Seek professional help : If the above methods can not solve the problem, it is recommended to contact professional maintenance personnel or manufacturer technical support, they can provide more professional troubleshooting and maintenance services.

Before any repair or maintenance operation, be sure to follow the relevant safety procedures.